RADWAG Scales of WPT series - Manual (Page 55)

- In order to continue the procedure press , the indication
returns to ZERO and the letter „P” appears in the left part
of the display. The scale is ready for weighing;
- In order to terminate the previous totalizing procedure press
key, , or . You will see the letter „P” in the left part of
the display. The scale is ready for weighing.
15.8.4. Return to weighing
• Press key, you will see:
• Before leaving the function it is possible to print out
subsequent weighings and the sum of weighings on the
connected printer (press to print, press to cancel),
• The following message will appear on the display:
• Press key to return to weighing,
• Press to return to totalizing.
Notice:
In case of overflow of the range of the display in totalizing you will see
<5-FULL> message in the display. In that case unload the pan and
press to complete the procedure with a printout of sum of all
weighings or put a lower mass on the pan which does not cause
the overflow error.
- 55 -