RADWAG Scales of WPT series - Manual (Page 59)

Return to weighing:
•
Press .
15.10.2. Selecting a tare value from the memory
• Enter
function according to the ch. 16.10.1 of the manual,
• The program goes to displaying the first value from the selection
of tare values (press to chose different values):
• To use an entered tare value press
, you will see the tare value
on the display preceded by the „-„ sign and the Net pictogram:
Caution:
A tare value from the memory is not remembered after powering off
and on the scale.
- 59 -