RADWAG Scales of WPT series - Manual (Page 49)

Return to weighing:
• Press the
key twice.
15.5. Control of % deviation referring to the inscribed standard mass
Scale software enables control of deviation (in %) of weighed loads
mass referring to the inscribed standard mass. Mass of standard can
be determined by its weighing (PrcA function) or entered to the scale
memory by an user (PrcB function).
15.5.1. Standard mass determined by its weighing
Procedure:
• Enter
to function:
• You will see on the display and then:
• place an load on the pan which mass will be accepted as standard
• press to confirm this operating mode
• after few seconds the indication 100,00% will be displayed
• From this moment display will not indicate mass of weighed load
but deviation of load mass placed on the pan referring to the mass
of standard (in %).
- 49 -