Overview, 3 warranty, Features – Next Advance SP570-M User Manual
Page 7

NEXT>>>ADVANCE
www.nextadvance.com
SP500 series OEM Programmable Syringe Pump
NE500 series manual
2
Revision 101101
1.3 Warranty
Next Advance Inc. warranties this product, and accessories for a period of two year, parts and labor, from
the date of purchase. The repaired unit will be covered for the period of the remainder of the original
warranty or 90 days, whichever is greater.
A return authorization number must be obtained from Next Advance Inc. before returning a unit for repair.
Warranty covered repairs will not be performed without a return authorization number. At the option of
Next Advance Inc., a defective unit will be either repaired or replaced.
This warranty does not cover damage by any cause including, but not limited to, any malfunction, defect or
failure caused by or resulting from unauthorized service or parts, improper maintenance, operation
contrary to furnished instructions, shipping or transit accidents, modifications or repair by the user, harsh
environments, misuse, neglect, abuse, accident, incorrect line voltage, fire, flood, other natural disasters, or
normal wear and tear. Changes or modifications not approved by Next Advance Inc. could void the
warranty.
The foregoing is in lieu of all other expressed warranties and Next Advance Inc. does not assume or
authorize any party to assume for it any other obligation or liability.
2. Overview
The SP500 series is a general purpose single syringe pump capable of infusion and withdrawal. It is
controlled from a microcontroller based system which drives a step motor, allowing a large range of
pumping rates calibrated to the inside diameter of the loaded syringe. The syringe is driven from a drive-
screw and drive-nut mechanism.
Features:
Infusion and withdrawal pumping of
syringes up to 60 cc.
Pumping rates from 0.73 l/hr with a 1 cc to
2120 ml/hr with a 60 cc. (SP500 and SP501
models)
SP501 and SP511 models: Stall detection:
Automatically stops pump when pumping is
impeded
SP510 and SP511 models: extra powerful
motor for higher flow rates and more force
SP570-M model: extra precise motor for
microfluidics
Infusion and withdrawal volumes separately
accumulated.
Programmable dispense volumes.
Programmable Phases allowing complex
pumping applications and interaction with
external devices.
Non-volatile memory of all operating
parameters and Pumping Program
RS-232 bi-directional control.
Built-in pump network driver. Pump
network supports up to 100 pumps and
other devices.
Two modes of RS-232 control, Basic and
Safe. Safe mode provides communication
error detection, loss of communication
detection, and automatic transmitting of
alarm conditions.
TTL I/O with software filtered control
inputs to eliminated glitches and ringing on
the control inputs.
Configurable TTL operational trigger.
Power Failure Mode: Restarts the Pumping
Program after a power interruption.
Audible Alarm