Young Ultrasonic Anemometer Heated Model 85004 - Manual (Page 10)

Page 7
85004-90
Voltage Output: Disabled
Sample Count: Set to 0 if polling frequently. Set to
highest anticipated wind speed (m/s) up
to 31 if polling infrequently. Average
current consumption is a function of
polling rate and sample count.
7.5 SDI-12 CONTINUOUS
Serial Output Format: SDI-12 CONT
Output Delay: 0
Sample Count: 0
7.6 SDI-12 STANDBY
Serial Output Format: SDI-12 STANDBY
Output Delay: 0
Damping Factor: 0
Sample Count: Set to 0 if polling frequently. Set to
highest anticipated wind speed (m/s) up
to 31 if polling infrequently. Average
current consumption is a function of
polling rate and sample count.
8.0 HEATER OPERATION
Internal heaters are powered by a separate DC power supply. For
optimum operation a supply of 22-26 VDC is recommended. Heat-
ers are automatically controlled by internal circuitry. Heaters may be
disabled using the 2DSETUP program supplied.
9.0 WARRANTY
This product is warranted to be free of defects in materials and
construction for a period of 12 months from date of initial purchase.
Liability is limited to repair or replacement of defective item. A copy
of the warranty policy may be obtained from R. M. Young Company.
10.0 CE COMPLIANCE
This product has been tested and shown to comply with European
CE requirements for the EMC Directive. Please note that shielded
cable must be used.
Declaration of Conformity
R. M. Young Company
2801 Aero Park Drive
Traverse City, MI 49686 USA
Model 85004
The undersigned hereby declares on behalf of R. M.
Young Company that the above-referenced product, to
which this declaration relates, is in conformity with the
provisions of:
Council Directive 2004/108/EC (December 15, 2004)
on Electromagnetic Compatibility
David Poinsett
R&D Manager