WIKA BCS10 - Manual (Page 27)

27 WIKA operating instructions calibration system, model BCS10
14051046.01 10/2012 GB/D/F/E
GB
9. Dismounting, return and disposal / 10. Accessories
9.2 Return
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazard-
ous substances (acids, bases, solutions, etc.).
When returning the instrument, use the original packaging or a suitable transport
package.
To avoid damage:
1. Wrap the calibration system in an antistatic plastic film.
2. Place the calibration system, along with shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.
9.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
This marking on the instruments indicates that they must not be disposed
of in domestic waste. The disposal is carried out by return to the manufac-
turer or by the corresponding municipal authorities (see EU directive
2002/96/EC).
10. Accessories
For use of the calibration system model BCS10 with the CPGlog data-logger evaluation
software see instruction manual "Data-logger software" at www.wika.de.
The order number of the CPGlog data-logger is given in the data sheet SP 60.08.