WIKA A2G-85 - Manual (Page 4)

WIKA operating instructions air2guide model A2G-85
GB
4
40339564.02 07/2012 GB/D/F/E/I
1. General information
1. General information
■ The CO
2
sensor described in the operating instructions has been
designed and manufactured using state-of-the-art technology. All
components are subject to stringent quality and environmental
criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
■ These operating instructions contain important information on
handling the instrument. Working safely requires that all safety
instructions and work instructions are observed.
■ Observe the relevant local accident prevention regulations and
general safety regulations for the instrument’s range of use.
■ The operating instructions are part of the product and must be kept
in the immediate vicinity of the instrument and readily accessible to
skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the
operating instructions prior to beginning any work.
■ The manufacturer’s liability is void in the case of any damage caused
by using the product contrary to its intended use, non-compliance
with these operating instructions, assignment of insufficiently
qualified skilled personnel or unauthorised modifications to the
instrument.
■ The general terms and conditions contained in the sales
documentation shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
www.air2guide.com
- Relevant data sheet: SP 69.07