WIKA CEP1000 - Manual (Page 9)

9 WIKA operating instructions, model CEP1000
11570351.02 10/2010 GB/D/F/E/I
GB
3. Specifications / 4. Design and function
Dimensions in mm
Side view Front view
4. Design and function
4.1 Short description / Description
The CEP1000 is a loop calibrator operating in the range of 4 ... 20 mA designed for
both troubleshooting and calibration of circuits without separate power supply. Very
high accuracy and diverse special functions make the instrument to a user-friendly and
highly flexible calibration instrument.
The CEP1000 can be used as current reference standard for up to 24 mA, it can also be
used to simulate a 2-wire connection or to perform measurements in circuits with up to
24 mA without separate power supply.
By means of the calibrator it is possible to measure process signal voltages of up to 28 V
direct current with an accuracy of 0.015 % of the measurement value.