WIKA 732.15.160 - Manual (Page 13)

11265191.07 12/2012 GB/D/F/I
WIKA operating instructions differential pressure gauge models 712.15.160, 732.15.160 13
GB
Specifications A-10 IS-20
Data sheet PE 81.60 PE 81.50
Design standard intrinsically safe
Pressure ranges bar 0 ... 6 to 0 ... 60 0 ... 6 to 0 ... 60
Outputs mA 4 ... 20 4 ... 20 (line transformer)
Medium temperature °C -30 ... +100 -20 ... +80
Ambient temperature °C -30 ... +100 -20 ... +80
Wetted parts stainless steel stainless steel
Power supply U B DC 8 V < U B ≤ 30 V 10 V < U B ≤ 30 V
Maximum load R A Ohm R A ≤ (U B - 8 V) / 0.02 A R A ≤ (U B - 10 V) / 0.02 A
Accuracy
BFSL % of span ≤ 0.5 ≤ 0.25
Compensated temperature
range
°C 0 ... +80 °C 0 ... +80 °C
Wiring details,
2-wire
The corresponding operating instructions are included in the delivery
of each differential pressure gauge with integrated transmitter for
working pressure indication.
Non hazardous
area
Hazardous
(classified) area
9. Transmitter for working pressure indication
9. Transmitter for working pressure indication (optional)
Standard version model A-10
or Ex version model IS-20
Transmitter for working
pressure indication
The transmitters for the working pressure
are screwed in sideways, on the left side of
the minus measurement chamber and can,
if necessary, be retrofitted on-site.
Pressure connection for Transmitter: G 1/4
(male)