WIKA DPT-10 - Manual (Page 12)

The DD (Device Descriptions) and CFF (capability files) necessary for
planning and configuration of your FF (Foundation Fieldbus) commu-
nication network are available in the download area of the WIKA
homepage www.wika.com under "S
ervices". The appropriate certifi-
cates are also available there. A CD with the appropriate files and
certificates can be ordered by phone from one of the WIKA agencies.
The backlight of the indicating and adjustment module is powered by
the sensor. Prerequisite is a certain level of operating voltage.
The data for power supply are specified in chapter "Technical data".
3 .3 Operation
DPT 10 can be adjusted with different adjustment media:
l with indicating and adjustment module
l a configuration tool
The entered parameters are generally saved in DPT10, optionally also
in the indicating/adjustment module.
3 .4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
Caution:
Instruments for oxygen applications are sealed in PE foil and provided
with a label "Oxygen! Use no Oil". Remove this foil just before
mounting the instrument! See instruction under "Mounting".
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
DD/CFF
Packaging
Transport
Transport inspection
Storage
12 Differential pressure transmitter DPT10 - metal measuring diaphragm • Foundation Fieldbus
3 Product description
37246
-EN
-100120