Kramer Electronics SV-551ALC - Manual (Page 9)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the SV-551 SummitView™ Processor/Switcher
6
PART II The SV-551 SummitView™ Processor/Switcher
PART II defines the SV-551 SummitView™ Processor/Switcher
4 Defining the SV-551 SummitView™ Processor/Switcher
The Kramer SV-551 SummitView™ Processor/Switcher is designed specifically
for the SummitView™ system and is an integral part of it. It fits inside the SV-1
housing. The SV-551 can only be controlled via the default RC-63DL or via one of
the other (optional) controllers: RC-62 and RC-62L, or the RC-63A, RC-63AL
and RC-63D. The SV-551 features CAT 5 video and audio inputs (including
optional DDC for VGA). It also has an IR output for video sources and features a
Master controller, as well as a power amplifier and audio line out. The SV-551
front panel controls include five input selector buttons, three LEDs, and a USB
port. It receives input signals via the RJ-45 CAT 5 connectors from the SV-301,
SV-302, SV-303, SV-304, and the SV-305 wall plate devices. The SV-551 RJ-45
CAT 5 inputs include: two for video, three for computers, and three DDC
connectors.
The SV-551 has a projector output on a 15-pin HD connector, one component
video on three RCA connectors, two composite video outputs, each on an RCA
connector, and an s-Video output on a 4p connector. In addition, the SV-551
features terminal blocks for a balanced stereo audio speakers output, terminal
blocks for an AUX input, 10V volume, relays, RS-232, and RS-485. The SV-551 is
controlled by one of Kramer's SV controllers (RC-62 or RC-63) via the proprietary
communication channel K-NET, and can also be controlled via the Ethernet and/or
the front panel input selector buttons. The SV-551 is 12VDC fed.