2 quick start configuration setup, Quick start configuration setup – Kramer Electronics SV-551ALC User Manual
Page 6
Overview
3
•
SV-301, SV-302, SV-303, SV-304, and SV-305 Wall Plate Devices
•
RC-62 Series (RC-62, RC-62L), RC-63A Series (RC-63A, RC-63AL),
and RC-63D Series (RC-63D, RC-63DL) Room Controllers
•
SPK-CC688, SPK-CC448, SPK-CC348F Speakers
•
MT-P9P 9” and MT-P6P 6” center pole sections for the SV-1 Mounting
Box which can be attached to any 1.5NFS projector mounting system
•
SV-1 Pole Mounting Box which can be attached to any 1.5NFS projector
mounting system
•
Additional TP cables (see
Section 9
The following items are not provided by Kramer:
•
Projector (or display device)
•
Screen (and mounting hardware)
•
Source devices, such as, DVD/VCR player, scanner, or computer
To achieve the best performance:
•
Consider the condition of the room—its size, the way it is arranged,
whether the walls and ceiling are drywall or cement—that may limit
where and how you can install SummitView™, where required, refer to
the ADA requirements (see
Section 6
Where an internal installation is impractical (for example, if the walls
and ceiling are constructed of cement and you do not want to drill inside
them), you can install the SummitView™ Kit externally, that is, install
the SV-551 in a rack (see
•
Connect only good quality connection cables and avoid interference from
neighboring electrical appliances and position your SummitView™ away
from moisture, and excessive sunlight
3.2 Quick Start Configuration Setup
Refer to the color configuration page included with your SummitView™ Kit.
1 Download the user manual: SV-301, SV-302, SV-303, SV-304, SV-305 f
2 Download the user manual: RC-62, RC-63A and RC-63D Series fro