Kramer Electronics SV-551ALC - Manual (Page 7)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3.3 8-Step Essentials Kit Quick Installation Guide
This data summarizes how to install your SummitView™ Essentials Kit (similar
principles apply if you are installing other SummitView™ configurations).
Table 1: Quick Installation Guide for the SummitView™ Standard Kit
Description
1 Prepare the openings for the Wall Plates
SV-301 and SV-302, and the Room
Controller RC-63DL
2 Route the wiring from the proposed
location of the SV-551 via:
1. Two STP cables
1
2. One STP cable to the intended
SV-302 location
to the intended
SV-301 location
3. K-NET cabling to the intended
RC-63DL location
4. Speakers cabling to the
speakers’ intended location
5. If the SV-551 and/or the RC-63DL
are to be used as room controllers,
route the appropriate control
cables to their intended locations
3 Install the Wall Plates by connecting the:
1. STP cables to the wall plates and installing the wall plate
2. BCP-KNET-50 cable to the RC-63DL and installing the RC-63DL
(see Section 7 )
4 Install the Ceiling Speakers
1 There are two types of STP cable provided with SummitView™: CP-STP-50 (plenum-rated for the SummitView™ US) or C-STP-50
(non-plenum for the SummitView™ Europe)