Kramer Electronics SV-551ALC - Manual (Page 26)

Installing Optional Ceiling Speakers
23
5.4 Painting the Speaker
You can paint the speakers before or after the speaker is installed.
When painting before installation:
• Clean the rim and grille with mineral spirits or other light solvent so as
not to damage the surface
• Spray with color by holding the spray can at an angle of 45°
Note: When spraying the grille, take care not to clog the holes in the
grille as this will greatly reduce the sound quality of the speakers
When painting after installation:
• Use the circle that you cut out of the template as a paint mask
• After you finish painting, remove the paint mask
5.5 Connecting Several Speakers
Advanced User Tip
For installations in large rooms, when
several speakers are used for each audio
channel, you can connect the speakers in
two possible layouts:
• Wiring in parallel: connect the wire pair of the next speaker to PIN 2
and PIN 3. When one speaker is removed, subsequent speakers will
remain connected
• Daisy-chaining: connect the wire pair of the next speaker to Pin 1 and
Pin 4. When one speaker is removed, subsequent speakers will be
disconnected