Part iii detailed installation instructions, 2 defining the rc-63dl room controller, Defining the rc-63dl room controller – Kramer Electronics SV-551ALC User Manual
Page 13
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the SV-551 SummitView™ Processor/Switcher
10
PART III Detailed Installation Instructions
PART III covers these topics: installing the Wall Plates, the Ceiling Speakers and the SV-551
We recommend that after deciding where you want to install the screen and the
projector, you install in this order, the:
1. Cables and wires.
2. Room Controller and wall plates (see
Section 4.2
Section 4.3
).
3. Ceiling speakers (see
Section 5
4.2 Defining the RC-63DL Room Controller
This section defines the default Kramer SummitView™ RC-63DL Room
Controller, which is included as part of the SummitView™ Essentials Kit.
The RC-62 and RC-63A are also available for additional purchase (optional).
Refer to the separate user manual: RC-62, RC-63A and RC-63D Series
. Note,
that each SummitView™ kit comes with the appropriate set of cables included (see
). Each room controller can be used as:
•
A system controller for the SummitView™ system when connected via
K-Net cable to the SV-551 SummitView™ Processor/Switcher. When
used in this way no programming of the room controller is needed
•
An advanced, standalone, wall-mounted room controller. When used in
this way programming of the room controller is required
The Kramer RC-63DL is a 2 Gang wall plate. It features 6 front panel buttons
designed in 2 groups; 1 group of 2 buttons, and another group of 4 buttons. Each
group can be programmed according to the user's requirements. LCD and plastic
cap variations are available. It has a digital volume control adjustment knob with 5
LEDs.
The RC-63DL includes 2 relays for the simplified and centralized control of room
functions (such as lighting, closing blinds, screen settings, and so on), an IR output,
a bi-directional RS-232 port, and 2 K-Net ports. In addition, the RC-63DL
features an IR-learner for the customized control of external sources, absorbing the
IR commands from different remote transmitters. A USB port is included for
programming the RC-63DL via a computer.
1 It includes these models: RC-62, RC-62L (the RC-62 Series); RC-63A and RC-63AL (the RC-63A Series) and RC-63D and RC-63DL
(the RC-63D Series)
Download it
2 Refer to the separate online “K-Config Confi