Kramer Electronics RC-63DL - Manual (Page 7)

Installing the Room Controller
3
3
Each room controller includes:
• Configurable backlit 1 buttons to set up any supported 2
• A bidirectional RS-232 wired serial port, for universal display (for example,
projectors) and switcher control
command
• Two K-NET ports
• Two relays for the simplified and centralized control of room functions (such
as lighting, closing blinds, screen settings, and so on)
• An IR control port
• An IR-learner for the customized control of external sources, receiving the IR
commands from different remote transmitters without the need for an external
IR remote control unit
• Macro mode operation, for programming multiple commands with the press
of a single button
• Support for firmware upgrade via USB
In addition, the RC-63A and the RC-63D feature a separate analog and digital
volume adjustment knob, respectively.
To achieve the best performance:
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-levels
(often associated with low quality cables)
• Avoid interference from neighboring electrical appliances and position your
Kramer Room Controller away from moisture, excessive sunlight and dust
4 Installing the Room Controller
This section defines the:
•
RC-62, and RC-62L, see section 4.1
• RC-63A and RC-63AL, see section 4.2
• RC-63D and RC-63DL, see section 4.3
1 256 colors are available for backlit buttons (to be configured by the system integrator)
2 To be configured by the system integrator only