Kramer Electronics VS-88HCB - Manual (Page 25)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your VS-88HCB
22
7.5 Storing/Recalling Input/Output Configurations
You can store and recall up to 8 input/output configurations (or setups) in
non-volatile memory, using the INPUT SELECTOR buttons 1 to 8.
7.5.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button blinks.
2. Press one of the INPUT SELECTOR buttons from 1 to 8. This will be the setup
# in which the current status is stored.
The memory stores the data at that reference.
7.5.2 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate INPUT SELECTOR button (the INPUT SELECTOR
button # corresponding to the setup #). The memory recalls the stored data from
that reference.
7.5.3 Deleting an Input/Output Configuration
To delete an input/output configuration, do the following:
1. Press the STO and RCL buttons simultaneously.
Both the STO and RCL buttons blink.
2. Press the appropriate INPUT SELECTOR button.
This erases that specific input/output configuration from the memory, leaving it
empty and available 1 .
7.6 Resetting the Machine
To reset the machine, press INPUT buttons 1, 2 and 3 simultaneously. The
machine resets itself and a 7-segment self-test is automatically performed.
1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration