Kramer Electronics VS-88HCB - Manual (Page 20)

Connecting the VS-88HCB
17
6.5 Setting the VS-88HCB Dipswitches
This section describes the machine set-up and dipswitch selection.
Figure 11 illustrates the factory default dipswitches and Table 3 describes
them.
OFF
ON
Figure 11: VS-88HCB Dipswitches
Table 3: Dipswitch Settings
DIPS Function Description
1, 2, 3 Self Address Determines the position of the machine in the input expansion configuration
(in the factory default, these DIPs are set to ON)
4 RS-485 TERM ON for RS-485 Line Termination (factory default)
OFF for no RS-485 Line Termination
5 Reply ON enables reply from switcher to PC (factory default)
OFF disables reply from switcher to PC
6, 7 RESERVED Set to ON (factory default)
8 RS-232 \ RS-485 ON enables RS-232 communication between switcher and PC (factory
default)
OFF disables reply from switcher to PC