Kramer Electronics VS-88HCB - Manual (Page 11)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VS-88HCB
8
4.1 Using the IR Transmitter
You can use the RC-IR2 IR transmitter to control the machine via the built-in
IR receiver on the front panel or, instead, via an external IR receiver 1 . The
external IR receiver can be located 15 meters away from the machine. This
distance can be extended to up to 60 meters when used with three extension
cables 2 .
Connect the external IR receiver to the REMOTE IR 3.5mm connector.
Control the
VS-88HCB using the front panel buttons, or remotely via the
Kramer RC-IR2 Infrared Remote Control Transmitter, via an external remote
IR receiver (optional), or via RS-485 or RS-232 serial commands transmitted
by a touch screen system, PC, or other serial controller.
1 P/N: C-A35M/IRR-50
2 P/N: C-A35M/A35F-50