Kramer Electronics VS-88HD User Manual

Page 15

Operating the VS-88HD

7.2.1

Toggling between the AT ONCE and CONFIRM Modes

To toggle between the AT ONCE and CONFIRM modes, do the following:

1. Press the dim TAKE button twice (the button blinks and then illuminates)

to toggle from the AT ONCE mode (in which the TAKE button is dim) to

the CONFIRM mode (in which the TAKE button illuminates).

Actions now require user confirmation and the TAKE button illuminates.

2. Press the illuminated TAKE button (twice) to toggle from the CONFIRM

mode back to the AT ONCE mode. The TAKE button no longer

illuminates.

Actions no longer require user confirmation and the TAKE button no

longer illuminates.

7.2.2

Switching in Confirm Mode

To switch an input to an output (in CONFIRM mode - when the TAKE

button is illuminated), do the following:

1. Press an OUT-IN combination.

The TAKE button and the 7-segment Display blink

2. Press the TAKE button to confirm the action.

The 7-segment Display no longer blinks. The TAKE button illuminates.

To switch several input and output combinations (in CONFIRM mode), do

the following:

1. Press each OUT-IN combination in sequence.

The 7-segment Display blinks as well as the TAKE button.

2. Press the TAKE button to confirm all the actions.

The 7-segment Display no longer blinks. The TAKE button illuminates.

To exit the CONFIRM mode, press the TAKE button twice (the button blinks

and then no longer illuminates).

7.3 Storing/Recalling Input/Output Configurations

You can store and recall up to eight setup configurations using the eight OUT

SELECT buttons.

1 The timeout lasts for 10 seconds