Kramer Electronics VS-41HD - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 1
3 Overview 3
4 Your VS-41HD 4x1 HD/SD-SDI Switcher / DA 3
5 Installing on a Rack 6
6 Connecting Your VS-41HD 4x1 HD/SD-SDI Switcher / DA 7
6.1 Dipswitch Settings 8
6.1.1 Setting the Machine ID Dipswitches 9
6.2 Controlling via RS-232 (for example, using a PC) 9
6.3 Controlling via the RS-485 Port 10
6.4 Switching two Genlocked Video Signals 11
6.5 Controlling via ETHERNET 11
6.5.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) 11
6.5.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 13
6.5.3 Configuring the Ethernet Port 13
6.6 Controlling via the C.C REMOTE Connector 13
7 Operating the VS-41HD 14
7.1 Locking the Front Panel 14
8 Technical Specifications 15
9 Kramer Protocol 2000 16
Figures
Figure 1: VS-41HD 4x1 HD/SD-SDI Switcher / DA 4
Figure 2: Connecting the VS-41HD 4x1 HD/SD-SDI Switcher / DA 8
Figure 3: VS-41HD SETUP Dipswitches 8
Figure 4: Connecting a PC without using a Null-modem Adapter 9
Figure 5: Controlling via RS-485 (for example, using an RC-3000) 10
Figure 6: Local Area Connection Properties Window 12
Figure 7: Internet Protocol (TCP/IP) Properties Window 12
Figure 8: Using the C.C REMOTE Connector 13