beautypg.com

1 controlling via rs-232, Controlling the vs-21hdcp-ir via rs-232, Figure 2 – Kramer Electronics VS-21HDCP-IR User Manual

Page 10

background image

VS-21HDCP-IR - Connecting the VS-21HDCP-IR

7

Figure 2: Connecting the VS-21HDCP-IR 2x1 DVI Switcher

4.1

Controlling via RS-232

You can connect to the VS-21HDCP-IR via an RS-232 connection using, for

example, a PC. Note that a null-modem adapter/connection is not required.

To connect to the VS-21HDCP-IR via RS-232:

Connect the RS-232 9-pin D-sub rear panel port on the VS-21HDCP-IR unit

via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin

5 need to be connected) to the RS-232 9-pin D-sub port on your PC









See also other documents in the category Kramer Electronics Routers: