Kramer Electronics VS-162AVRCA - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
3 Overview 2
4 Summary of how to Operate a Single Machine 3
5 Your Audio-Video Matrix Switcher 4
6 Installing the Audio-Video Matrix Switcher 8
6.1 Configuring a Stand Alone Switcher 8
6.1.1 Connecting a Balanced Stereo Audio Input / Output (VS-162AV) 9
6.1.2 Connecting an Unbalanced Stereo Audio Input / Output (VS-162AV) 9
6.2 Assembling a System of Interconnected Switchers 10
6.3 Dipswitch Settings 11
6.3.1 Setting the MACHINE # 11
6.3.2 Understanding the SYSTEM Mode 12
6.3.3 Understanding the SLAVE Mode 13
6.4 Connecting a Control Interface 13
6.4.1 Connecting the RS-232 Control Interface 14
6.4.1.1 Connecting 2 Units using a Null-modem Adapter 15
6.4.1.2 Connecting 2 Units without using a Null-modem Adapter 15
6.4.1.3 PC DB9 COM Port Connection to a Unit with a Null-modem Adapter 15
6.4.1.4 PC DB9 COM Port Connection to a Unit with no Null-modem Adapter 15
6.4.1.5 PC DB25 COM Port Connection to a Unit 16
6.4.2 Connecting the RS-485 Control Interface 16
6.5 Configuring the Sync 18
6.6 Connecting the KEYBOARD EXTENSION 19
7 Operating Your Audio-Video Matrix Switcher 20
7.1 Startup Display 20
7.2 Using the Front Panel Buttons 20
7.2.1 Choosing the Audio-Follow-Video or Breakaway Mode 21
7.2.1.1 Setting the Breakaway Mode 21
7.2.1.2 Setting the Audio-Follow-Video Mode 21
7.2.2 Confirming Settings 22
7.2.2.1 Toggling between the AT ONCE and CONFIRM Modes 22
7.2.3 Switching 23
7.2.3.1 Switching one Input to one Output 23
7.2.3.2 Switching several Inputs to several Outputs 24
7.2.3.3 Switching one Input to all Outputs 25
7.2.4 Clearing 26
7.2.4.1 Clearing an Output 26
7.2.4.2 Clearing several Outputs 27
7.2.4.3 Clearing all Outputs 28
7.2.5 Storing and Recalling Setups 29
7.2.5.1 Storing Setups 29
7.2.5.2 Recalling Setups 30