Kramer Electronics VM-24HDCP - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 About HDCP 3
3.2 Defining EDID 4
3.3 Recommendations for Best Performance 4
4 Your VM-24HDCP 2 Input 1:4 DVI Distributor 4
4.1 Using the IR Transmitter 6
5 Installing in a Rack 7
6 Connecting the VM-24HDCP 8
6.1 Connecting via RS-232 (for example, using a PC) 10
6.2 Operating the VM-24HDCP 10
6.3 Using the EDID Buttons 10
6.3.1 Acquiring / Changing the EDID from One Output 11
6.3.2 Acquiring the Default EDID 12
6.3.3 Acquiring the Auto-mix EDID from the Connected Outputs 12
7 Technical Specifications 13
8 Communication Protocol 14
Figures
Figure 1: VM-24HDCP 2 Input 1:4 DVI Distributor 5
Figure 2: Connecting a VM-24HDCP 2 Input 1:4 DVI Distributor 9
Figure 3: Connecting a PC 10
Tables
Table 1: VM-24HDCP 2 Input 1:4 DVI Distributor Features 6
Table 2: The EDID Modes 11
Table 3: VM-24HDCP Technical Specifications 13
Table 4: Protocol Definitions 14
Table 5: Instruction Codes for Protocol 2000 15