Kramer Electronics VM-114H4C - Manual (Page 8)

Overview
5
5
3.2 About the Power Connect™ Feature
The Power Connect™ feature here means that only the transmitter needs to be
connected to a power source when the devices are within 90m (270ft) of each
other. The Power Connect™ feature applies as long as the cable can carry power
and the distance does not exceed 90m on standard CAT 5 cable. For longer
distances, heavier gauge cable should be used
1
.
!
Warning: Using a TP cable that is incorrectly wired will
cause permanent damage to the device
3.3 Recommendations for Best Performance
To achieve the best performance:
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances and position your
VM-114H4C away from moisture, excessive sunlight and dust
1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances