Kramer Electronics VM-114H4C - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Recycling Kramer Products 1
2.2 Quick Start 2
3 Overview 4
3.1 Using Shielded Twisted Pair Cable 4
3.2 About the Power Connect™ Feature 5
3.3 Recommendations for Best Performance 5
4 Defining the VM-114H4C 6
5 Using the VM-114H4C 7
5.1 Connecting the VM-114H4C 7
5.2 Acquiring the EDID 8
5.2.1 Disabling/Enabling Deep Color Support 9
5.3 Connecting to the VM-114H4C via RS-232 9
5.4 RS-232, IR Control and Pass-through 10
5.4.1 RS-232 Control and Pass-through Using the VM-114H4C 10
5.4.2 Local IR Control and IR Pass-through Using the VM-114H4C 10
6 Wiring the Twisted Pair RJ-45 Connectors 14
7 Technical Specifications 15
8 Default Communication Parameters 15
9 Default EDID 16
10 Kramer Protocol 2000 16
Figures
Figure 1: VM-114H4C Front Panel 6
Figure 2: VM-114H4C Rear Panel 7
Figure 3: Connecting the VM-114H4C 8
Figure 4: VM-114H4C RS-232 Control and Pass-through 10
Figure 5: VM-114H4C IR Control and Pass-through Example One 11
Figure 6: VM-114H4C IR Control and Pass-through Example Two 12
Figure 7: VM-114H4C IR Control and Pass-through Example Three 13
Figure 8: TP Pinout Wiring 14