Muxlab HDMI Over Coax Extender Kit - Manual

© MuxLab Inc. 94-000746-A SE-000746-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment HDMI 1.3a
Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting
HDMI.
Transmission Transparent to the user
Bandwidth 225 MHz
Signals HDMI 1.3a
Supported Resolution 480i, 576i, 720p, 1080i, 1080p/23.98/24/25/29.9/30/50/59.94/60
Connectors One (1) HDMI receptacle.
Two (2) BNC Female 75 Ohms.
Note: HDMI cables not included.
Maximum Distance
Based on a maximum
length of 6.6 ft (2 m) of
HDMI cable per end.
480i: RG-59: 650 ft (198 m) RG-6: 800 ft (244 m)
720p, 1080i: RG-59: 500 ft (152 m) RG-6: 650 ft (198m)
1080p:
RG-59: 250 ft (76 m) RG-6: 300 ft (91 m)
Cable One (1) RG-59 or better cable required
Power Supply Two (2) 110-240V/5VDC power supplies with interchangeable blades
Power Consumption Transmitter: 3.30 Watt Receiver: 3.55 Watt
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Metal
Dimensions 4.72” x 3.54” x 1.18” (12.0 x 9.0 x 3.0 cm)
Weight 1.3 lb (0.59 kg)
Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty 2 years
Order Information 500465 HDMI Over Coax Extender Kit
HDMI Over Coax Extender Kit
500465
Quick Installation Guide
Overview
The HDMI Over Coax Extender Kit (500465) allows HDMI equipment to be connected
up to 250 ft (76 m) @ 1080p via one (1) RG-59 coaxial cable in a point-to-point
configuration. The Transmitter converts the HDMI signal to coax and the Receiver
converts the coax signal back to HDMI, supporting resolutions of 480i, 720p/1080i and
1080p. The kit comes with one (1) Transmitter and one (1) Receiver.
Applications
Applications include commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1. Identify the connectors on the Transmitter and Receiver as indicated on the
product labels.
2. Verify that the distance between the Transmitter and Receiver is within MuxLab
specifications (see Specifications table).
3. To install the Transmitter:
3a. Connect the Transmitter to the HDMI video source with an HDMI compliant