Muxlab Component Video/Stereo Audio Wall Balun, UK - Manual

© MuxLab Inc. 2010 94-000681-A SE-000681-A
Specifications
Environment Component Video (YPbPr), RGB Video (sync on green). 480i/p,
720p, 1080i/p.
Devices DVD players, satellite receivers, plasma displays, projectors,
monitors, up-converters, amplifiers, switchers, home theatre & other
equipment supporting HDTV component video and/or stereo audio.
Transmission Transparent to the user
Bandwidth Video (Y): DC to 60 MHz, 3 dB roll off
Analog audio: 20 Hz to 20 kHz
Maximum Input 1.1 Vp-p
Insertion Loss
(Y channel) 0.1 dB for 0.1 MHz
Gradually increasing to 2.5 dB over the frequency range
Insertion Loss (Audio) Less than 2 dB over the frequency range per pair of baluns
THD Less than 0.007% at 1 kHz
Return Loss (Y channel) Greater than 15 dB over the frequency range
Common Mode Rejection
Ratio (Y channel) -55 dB at 0.1 MHz
Gradually increasing to -20 dB at 60 MHz
Ground Loop Coupling
(GLC) Proprietary technique helps eliminate hum bars
US Patent Pending
Max. Distance via
Cat 5E/6 UTP/STP Cable Video: 480i/p: 1,000 ft (305 m). 720p and 1080i/p: 500 ft (152 m)
Stereo Audio: 3,250 ft (1 km)
Cable:
Cat 5E/6 UTP/STP 24 AWG or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/ft
Attenuation: 6.6 dB/1,000 ft at 1 MHz
Cable: RCA Impedance: 75 ohms at 1 MHz
Connectors Video Three (3) RCA jacks: Green (Y), Blue (Pb), Red (Pr).
RCA shields are on common ground. Grounding screw available.
RJ45 Shielded for twisted pair.
Connectors Audio Two (2) RCA jacks for analog audio.
RCA shields are on common ground
Pin Configuration
Reverse polarity sensitive Use EIA 568 A or B wiring standard and straight-through wiring
Compatibility Not compatible with 500050/51/52/53/54/55/56/57/250/251/252/
253
Temperature Operating: 0° to 55°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure ABS fire retardant plastic, Color white, Finish glossy.
Dimensions 86 mm x 86 mm x 36 mm. Choose 40 mm deep back box to allow
for Cat 5E/6 wiring connection.
Weight 4.1 oz (115 g)
Compliance FCC, CE, RoHS, European Standard for 86 mm faceplate
Warranty Lifetime
Order Information 500058-WP-UK Component Video/Stereo Audio Wall Balun
UPC: 6-27699-91058-0
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Component Video/Stereo Audio
Wall Balun
500058-WP-UK
Quick Installation Guide
Overview
The Component Video/Stereo Audio Wall Balun (500058-WP-UK) allows one component
video (YPbPr or RGB) signal and one (1) Stereo Audio channel to be transmitted via a
Cat 5E/6 twisted pair cable for more cost-efficient cabling. The product features Ground
Loop Coupling (GLC) to help eliminate “hum” bars. The product fits UK 86 x 86 mm back
boxes for neater wall mount installation. Used in pairs, or in conjunction with the 500058,
the Component Video/Stereo Audio Wall Balun supports high-definition resolution and true
left/right stereo audio for hi-fidelity commercial and residential AV applications. The
500058-WP-UK is compatible to the 500058 and is not compatible with part numbers
500050/ 51/ 52/ 53/ 54/ 55/ 56/ 57/ 250/ 251/ 252/ 253.
Installation
One (1) pair of baluns is needed to complete one component (YPbPr/RGB) connection
via a Cat 5E/6 twisted pair. To install the baluns, perform the following steps:
1. The pin configuration must be according to EIA 568,
either A or B and wired straight through (no
crossover).
2. Complete the connection between the two baluns,
using standard Cat 5E/6 twisted pair cable and
connecting hardware, terminated on RJ45 plugs at
both ends, ensuring that there are no split pairs or
taps.