beautypg.com

Rugged Ridge 6-Piece Body Armor Kit, 97-06 Jeep Wrangler (TJ) User Manual

Page 8

background image

Part Number 11650.05 (Rocker Side Panel Kit)

Step 16: Remove the two fender flare extensions from the body. Extensions are
held in place by three bolts located outside of the Jeep® and are assessable
from underneath the flare extensions.

Flare extensions can be reinstalled, but holes will need to be drilled in side
rocker armor after they have been installed.

Step 17: Clean mounting surface with a strong cleaner or rubbing alcohol. Avoid
areas that the product will not be adhered to.
THIS MUST BE DONE FOR ADHESIVE TAPE TO PROPERLY STICK.

FAILURE TO CLEAN COULD RESULT IN POOR ATTACHMENT AND
FAILURE OF PRODUCT TO STAY ATTACHED.

Allow area to dry completely before attaching body armor.

Step 18: Test fit the Side Rocker Guards to the vehicle before removing the
plastic backing film. This will aid in aligning the piece properly before securing
with the two-sided 3M tape.