beautypg.com

Installation instructions – Rugged Ridge 6-Piece Body Armor Kit, 97-06 Jeep Wrangler (TJ) User Manual

Page 2

background image


11650.17 (Hood Stone Guard)

Installation Instructions


Step 1:
Clean mounting surface with a strong cleaner or rubbing alcohol. Avoid
areas that the product will not be adhered to.
THIS MUST BE DONE FOR ADHESIVE TAPE TO PROPERLY STICK.

FAILURE TO CLEAN COULD RESULT IN POOR ATTACHMENT AND
FAILURE OF PRODUCT TO STAY ATTACHED

.

Allow area to dry completely before attaching body armor.

TOOLS NEEDED

: (1) Drill, (1) 7/64” drill bit, and (1) Phillips Head screw driver.


Step 2:

T

est fit the Hood Guard to the vehicle before removing the plastic

backing film. This will aid in aligning the piece properly before securing with the
two-sided 3M tape.


Step 3:
Remove plastic backing film from the affixed two-sided 3M tape. The
plastic film can be removed easier with the aid of a knife or cutting blade. Peel
from leading edges and pull away from tape

.