beautypg.com

Rugged Ridge 6-Piece Body Armor Kit, 97-06 Jeep Wrangler (TJ) User Manual

Page 7

background image

Step 13: Clean mounting surface with a strong cleaner or rubbing alcohol. Avoid
areas that the product will not be adhered to.
THIS MUST BE DONE FOR ADHESIVE TAPE TO PROPERLY STICK.

FAILURE TO CLEAN COULD RESULT IN POOR ATTACHMENT AND
FAILURE OF PRODUCT TO STAY ATTACHED.

Allow area to dry completely before attaching body armor.

Step 14: Test fit the Rear Corner Guards to the vehicle before removing the
plastic backing film. This will aid in aligning the piece properly before securing
with the two-sided 3M tape.
Step 15: Position armor onto rear fender Make sure that it is evenly spaced
before applying any pressure to armor. When satisfied with placement apply
pressure to all areas to properly secure armor to vehicle. Reinstall the side fuel
neck assembly, and rear tail lights. Install the (4) license plate tabs in holes from
supplied hardware.