Advent TOCLJ-OE100 - Manual (Page 39)

39
Using the keyboard enter the time in
(HH:MM) format. Then press AM or PM
icon and press OK. The newly entered
time will appear on the screen at the
Set Time icon.
Press the 12/24 Hour Format icon and
the following screen will appear:
The clock then can be set for either the
12 hour or the 24 format. Press the 12Hr
or 24Hr icon and it will be selected.
GPS Time:
This adjustment is used to synchronize
or ignore time with the Global Position-
ing System (GPS) time. GPS time is the
atomic time scale implemented by
the atomic clocks in the GPS ground
control stations and the GPS satellites
themselves. Set the time to synchronize
with the GPS time system or to ignore it.
Press the Ignore or Sync icon and it will
be selected.
Screen:
The Screen tab allows adjustment of
video signals and the unit’s monitor.
Refer to the following screen.
Brightness:
The Brightness allows the screen to be
adjusted to your preference. The screen
can be adjusted for daylight and night
time viewing preferences. Press the
ADJUST BRIGHTNESS –DAY icon. Refer
to the following screen.
To adjust the screen for night time
viewing, press the ADJUST BRIGHTNESS
–NIGHT icon. Refer to the following
screen.
The day/night picture brightness can
be adjusted from -10 to +10. Use the up
and down scroll buttons to access the
full range of the adjustment. The night
time screen adjustments should be
performed with vehicle’s headlights on
to provide a realistic setting.