Advent TOCLJ-OE100 - Manual (Page 29)

29
Pairing the Unit and a Wireless Phone:
1. Press the front panel MENU button
and then press the BLUETOOTH icon
to access the Bluetooth main menu.
2. Select the Bluetooth setup option
on the wireless phone to be paired
(please refer to the wireless phone’s
instruction manual to enter Blue-
tooth setup, turn Bluetooth on/off,
and perform pairing). Access the
wireless phone Bluetooth function
and set the Bluetooth function to ON.
3. Set your wireless phone Bluetooth
discover mode to ON.
NOTE: Some discovery modes have a
time limit usually a minute before they
are automatically turned off.
4. On the Bluetooth main menu press
the DEVICES icon. The following
screen will appear:
5. On the Bluetooth DEVICES screen
press the ADD icon. The following
screen will appear:
6. Press the wireless phone name under
DEVICE FOUND and then press the
CONNECT icon. The following screen
will appear:
7. Using the keypad enter the PIN or
Passkey to your wireless phone and
press OK. The following screen will
appear:
8. At this point the wireless phone will
ask the user to respond to a prompt
similar to “Pairing request from
_______ Accept? Yes or No “. The user
should answer Yes to the request.
Another prompt will appear on the
wireless phone to enter the PIN or
Passkey.
9. Enter the PIN or Passkey for the unit
(1234). Acknowledge the unit’s PIN
or Passkey on the wireless phone by
pressing (ENTER, OK etc.). The follow-
ing screen should appear.