Team Associated RC10B5 - Manual (Page 5)

5
:: Front Arms and Uprights Build - Bag B - Step 1
Build 2 (1 left, 1 right)
Trailing Axle Inserts
Build 2 (1 left, 1 right)
x2
91049
Heavy-duty
Ballstud,
10mm
31530
M3 x 5mm
BHCS
25215
M3 Locknut,
black
25215
M3 Locknut,
black
25237
5 x 10 x 4
Bearing
91406
Front
Axles
4670
M3 x 8mm
Set Screw
(not included in kit)
91400
Caster
Block Insert
(5°)
91407
Front Axle
Crush Tube
91047
Heavy-duty
Ballstud,
6mm
There are two
caster block inserts
included (0°, 5 °). 5 ° is the
standard one used.
!
91404
Steering
Block Insert
(2-4)
91404
Steering
Block
91400
Caster
Block
31520
M2.5 x 6mm
BHCS
(not included in kit)
x2
There are multiple options for the trailing
axle inserts. 4 is the stock setup.
Make sure the arrow is pointing forward
for your desired selection.
Also make sure both the right and left
sides are on the same setting.
You can install an
optional #4670 set
screw to better hold
the caster block inserts
and hinge pin.
You can install an
optional #31520
screw to use as a
steering stop setting.
!
:: Front Arms and Uprights Build - Bag B - Step 3
:: Front Arms and Uprights Build - Bag B - Step 2
Build 2 (1 left, 1 right) Build 2 (1 left, 1 right)
x2
x2
89202
M3 x 12mm
BHCS
31510
M2 x 4mm
BHCS
91400
Caster Block
Spacer
91402
Caster
Block
Bushing
91394
Hinge Pin
(front, outer)
91398
Front Arms
x2
2
4