Team Associated RC10B5 User Manual

Page 17

:: Wheels / Tires and Body - Bag K - Step 3

:: Wheels / Tires and Body - Bag K - Step 4

Painting Tips:

Your B5 Team Kit comes with a clear polycarbonate

body. You will need to prep the body before you can

paint it. Wash the inside thoroughly with warm water

and liquid detergent. Dry the body using a clean, soft,

lint-free cloth. Use the supplied window masks to

cover the windows from the INSIDE of the body

(RC cars get painted from the inside). Using high

quality masking tape, apply tape to the inside of the

body to create a design. Spray (use either rattle can

or airbrush) the paint on the inside of the body

(prefferably dark colors first, lighter colors last).

NOTE: ONLY use paint that is recommended for use

with (polycarbonate) plastics. If you do not, you can

destroy the plastic body!!!!.

After paint has completely dried, cut the body along

the trim lines. Make sure to drill or use a body reamer

to make the holes for the body mounts and antenna!

Racers Tip:

Instead of using the included body clips

(#21173), you can use hook and loop tape

on the inside of the body, and the sides of

the chassis to keep your body in place!

21173

Small

Body Clips

91470

Clear

Body, B5

91433

Wing Angle

Shim

91471

Clear Wing,

21173

Small

Body Clips

:: Wheels / Tires and Body - Bag K - Step 2

Build 2 (1 left, 1 right)

91148

M4 Locknut,

with flange

and knurl

91148

M4 Locknut,

with flange

and knurl