Myron L 6Psi and 4P - Manual (Page 57)

53
Press to accept
the value displayed.
The 6Psi inferred value
for hardness and “hrd” will
display (see example in
Figure 47).
4. Press the or keys to adjust the displayed
value to the desired value.
Press to accept the value displayed.
The pH value measured by
the 6Psi and “Ph” will display
(see example in Figure 48).
5. Press the or
keys to adjust the displayed
value to the desired value.
Press to accept the value displayed.
The value for temperature
measured by the 6Psi and
“°C” or “°F” will display (see
example in Figure 49).
6. Press the or
keys to adjust the displayed
value to the desired value.
Press to accept the
value displayed.
“User”, the user adjusted LSI
value and “LSI” will display
(see example in Figure 50).
Figure 50
User
Figure 47
Figure 48
Figure 49
°C