KEMP Cisco B-Series User Manual
Page 22
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 22 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
20. Click on the Local DNS Configuration > Hostname Configuration menu option.
Figure 3-12 Set Hostname screen
21. In the Hostname configuration screen, enter the hostname into the Current Hostname
input field.
22. Click on the Set Hostname button.
23. Click on the Local DNS Configuration > DNS Configuration menu option.
Figure 3-13 DNS configuration screen
24. In the DNS configuration screen, enter the IP address(es) of the DNS Server(s) which will
be used to resolve names locally on the LoadMaster into the DNS NameServer input
field.
25. Click on the Add button.
26. Enter the domain name that is to be prepended to requests to the DNS nameserver into
the DNS NameServer input field.
27. Click the Add button.
28. Click the Route Management > Default Gateway menu option.
Figure 3-14 Default gateway screen
29. In the DNS configuration screen, enter the IP address of the default gateway into the
IPv4 Default Gateway Address input field.
If you have an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway
Address input field.
30. Click the Set IPv4 Default Gateway button.
The LoadMaster is now fully installed and ready to be used. For further information on how to
configure and implement the Virtual LoadMaster, please refer to the LoadMaster
documentation which can be downloaded from the
page.