Create a lan connectivity policy, 3 create a lan connectivity policy – KEMP Cisco B-Series User Manual
Page 10
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 10 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
Figure 2-8: Policy Options
7. In the Options section, select Enabled for the following options:
a) Transmit Checksum Offload
b) Receive Checksum Offload
c) TCP Segmentation Offload
d) TCP Large Receive Offload
8. Select Disabled for Receive Side Scaling (RSS).
9. Enter 5 in the Failback Timeout (Seconds) text box.
10. Select MSI X as the Interrupt Mode.
11. Select Min as the Interrupt Coalescing Type.
12. Enter 125 as the Interrupt Timer (us).
13. Click OK.
2.3
Create a LAN Connectivity Policy
If you are planning on having a setup containing 4 arms or more, creating a LAN Connectivity
Policy will help to reduce complexity. Follow the steps below to create this policy:
1. Select the LAN tab.
2. Expand Policies.
3. Expand root.