Create a bios policy, 4 create a bios policy – KEMP Cisco B-Series User Manual

Page 12

Text mode
Original mode

LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation

Installation Guide

14. Expand the Operational Parameters section.
15. Select the relevant Adapter Policy.
16. Select the relevant QoS Policy.
17. Click OK.
18. Click OK again.
19. Add the remaining vNICs needed.

2.4

Create a BIOS Policy

To create a BIOS policy:

1. Select the Servers tab at the top.
2. Expand Policies.
3. Expand root.
4. Select BIOS Policies.

Figure 2-11: Create

5. Click the plus button to create a new policy.

Figure 2-12: Main BIOS Properties

6. Enter a Name.
7. Set the options as follows:

a) Reboot on BIOS Settings Change: Disabled
b) Quiet Boot: enabled
c) Post Error Pause: disabled
d) Resume Ac On Power Loss: last-state
e) Front Panel Lockout: disabled