Create a virtual cd-rom, 2 create a virtual cd-rom – KEMP Cisco B-Series User Manual
Page 16
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 16 / 27
LoadMaster for UCS Installation
Guide for LoadMaster for UCS
Installation
Installation Guide
3.2
Create a virtual CD-ROM
In the KVM console window complete the following steps:
1. Select the Virtual Media tab.
2. Click the Add Image button to open a file-selector window.
3. Select the LoadMaster installation image
4. Click the Open button.
5. Click the Mapped button.
The Virtual Media tab of the KVM console should now correspond with Figure 3-2.
Figure 3-2 The KVM Console