Vaddio CeilingVIEW HD HideAway - Manual (Page 16)

CeilingVIEW HD HideAway Manual
CeilingVIEW HD HideAway Manual, Document Number 342-0289 Rev. B Page 16 of 24
G. End the Calibration Mode in the CeilingVIEW HD HideAway: Press and hold the Calibration push button
on the IR Circuit Board in the Trim Ring until the Blue Power light stops flashing and becomes steady blue.
Vaddio IR Remote Commander: Setting the Upper and Lower Lift Stops
Note: The CeilingVIEW HD HideAway must be in the Calibration mode in order to set the Upper and Lower Lift
Stops.
Figure 26: Vaddio IR Remote Commander
Power On: Lowers the
CeilingVIEW HD HideAway and
turns on the Vaddio HD PTZ
Camera.
Power Off: Raises the
CeilingVIEW HD HideAway and
turns off the Vaddio HD PTZ
Camera.
Back Light
Compensation On/Off:
Sets the Lower Lift Stop
Data Screen:
Sets the Upper Lift Stop
Select IR Frequencies:
Select the same IR Setting that
the CeilingVIEW HD HideAway
and Vaddio HD PTZ Camera
have been set to (1, 2 or 3).
Pan/Tilt Left: Moves the
lift
down slowly
Pan/Tilt Up: Moves the
lift
up quickly
Pan/Tilt Right: Moves
the lift
up slowly
Pan/Tilt Down: Moves the
lift
down quickly
Figure 24:
CeilingVIEW HD
HideAway Lower
Lift-Stop Position
Align the upper
décor plate to the
Trim Ring
Figure 25:
CeilingVIEW HD
HideAway Upper
Lift-Stop Position
Align the lower
decor plate to the
Trim Ring
Lower Lift-Stop Position
Upper Lift-Stop Position