Pitco Frialator Gas Pasta Cookers PG14D - Manual (Page 28)

2-2
a. Press the On key . The display will light and the cooker will go onto simmer mode. In
simmer mode the controller will maintain the water temperature at the user specified setpoint.
b. Press the Boil/Simmer key to raise the water temperature to boiling. The main burners
will light and stay on continuously, bringing the water to a boil. After the water starts to boil,
the cooker is ready to cook the pasta. As long as the controller is in the Boil mode the main
burners will remain on.
c. To return to the Simmer mode press the Boil/Simmer key again.
2.2.2 Manual Controls
a. Place the POWER switch in the ON position.
b. Place the FUNCTION SELECT switch in the BOIL
position. The main burners will light and stay on
continuously, bringing the water to a boil. After the
water starts to boil, the cooker is ready to cook the
pasta. As long as the FUNCTION SELECT switch
is in the BOIL position the main burners will
remain on.
c. If you are not ready to cook, place the FUNCTION SWITCH in the SIMMER position. This
will cause the main burner to shut off and the internal thermostat to maintain the water
temperature at around 190°F.