Merrychef eikon e6 - Manual (Page 14)

E2 SERVICE MANUAL REV D 09/12
14
Example below; setting the cooking time (step 3):
To set the cooking time
select the Time symbol. Enter the cooking time
on the pad. Select OK to accept
the time.
DEVELOPMENT MODE: CREATING A COOK PROGRAM
1. Select the ‘chef’s hat’ symbol from the main menu to
enter development mode.
Enter stage 1 of the program
2. The temperature displays the set preheated oven
temperature.
To increase or decrease the temperature required,
select the temperature symbol (2), enter the
temperature in the keypad within the limits displayed
and select OK.
3. Select and set the cooking time up to a maximum of
10 minutes.
For example: Enter 110 (1minute and 10 seconds).
4. Select and set the Microwave Power [0, 5-100%]
5. Select and set a Fan speed (if available) within the
limits shown.
6. Select the information icon to enter an instruction
(Optional). The instruction appears in the display at
the beginning of that stage.
For example: ‘Stage 1 place product in the oven’.
Enter stage 2 of the program (Optional).
7. Programs can have up to a maximum of 6 stages.
Repeat the steps 2-6 from stage 1 above.
Running and saving the program
1. Select OK to confirm the Program.
2. Run the program (optional).If the results are not
satisfactory, select the backspace, change the
cooking settings and retest.
3. Select the save Cookbook symbol to record the
program to the cookbook.
4. Select an image to represent the program.
(Use the scroll arrows for more pictures.)
5. Enter the name for the cooking program, using a
maximum of 20 characters, for example, ‘1
BURGER’, then select OK to save the program to the
Cookbook.
6. A symbol with a green tick on a book is displayed to
indicate that the program has been successfully
saved to the Cookbook.
CLEAR
2
3
4
5
6
1
2 3 1
6 5 4
STAGE 1
DISPLAYED STAGE 2
DISPLAYED
ADD STAGE
DELETE STAGE
BACK TO STAGE 1
7
WARNING:
ENSURE PRODUCT IS IN THE OVEN AND ALL
SAFETY PRECAUTIONS ARE FOLLOWED
BEFORE RUNNING THE PROGRAM