Panasonic NCZA1 - Manual (Page 42)

GB42
Decalcification cycle:
Use this cycle occasionally and/or when the display shows .
This decalcification cycle enables simple and effective descaling. This programme runs in 2 phases and it takes approximately
11 minutes and should not be interrupted. When display shows
, press and follow steps from 3.
1
Press on the main menu.
2
Select “descaling programme”.
Note
•If is pressed, the display will return to the previous display.
(First phase)
3
Fill the water tank with 250 mL of water and add 125 mL of descaling
agent, then press .
Note
•If is pressed, the display will return to the previous display.
4
Press to start decalcification cycle. (Approx. 9 min.)
•Empty the drip tray before starting the cleaning cycle.
Note
•If is pressed during descaling, the
display indicates to empty the drip tray. To
continue the descaling cycle, press .
How to Clean
(Continued)