Panasonic NCZA1 - Manual (Page 25)

GB25
4
Adjust cup filling quantity and/or milk foam as desired.
•If adjustment is unnecessary, move on to the step 6.
•Press
or repeatedly to adjust quantity for coffee and/or milk foam. (P. GB15)
(e.g.: Espresso/Coffee) (e.g.: Cappuccino/Latte Macchiato)
To start, move on to step 6. To adjust coffee and milk ratio,
press and move on to step 5.
Note
•Only one cup can be prepared with this function.
•If is pressed, the display will return to the select drink menu (step 2). At same time the Espresso machine release
the coffee powder into the waste container. Refill the powder coffee at step 3.
5
Adjust coffee and milk ratio.
(
e.g.: Cappuccino
60% : 40% = milk : coffee
Note
•When “Latte Macchiato” is selected, the cup filling quantity will be
displayed as 80% and 20%.
•If is pressed, the display will return to the select drink menu.
6
Press to start brewing.
(e.g.: Espresso/Coffee) (e.g.: Cappuccino)
Note
•If is pressed during the brewing process, it
immediately stops the process.
After
flashes, the display will return to the main menu.
O When brewing is completed, display will return to the main menu.
Wait until display shows the main menu to remove the cup(s) or pot.
Q To turn off the power after use « P. GB27
)