Panasonic NCZA1 - Manual (Page 26)

GB26
Hot water
Preparations:
(P. GB16)
1 Fill the water tank with water.
2 Operate rinsing cycle.
•Make sure the milk hose is not attached.
1
Select “hot water” on the main menu.
Then place a cup(s) under the spout.
Note
•If simple rinsing is skipped after milk menu, milk residue may mix into
the hot water. (Step 7 on P. GB23)
In that case dispense the hot water a few times.
2
Select the number of cups and adjust quantity.
•The selected cup will light up in blue.
•If adjustment is unnecessary, move on to the step 3.
•Press
or repeatedly to adjust quantity for hot water.
Note
•If is pressed, the display will return to the previous menu.
3
Press to start brewing.
Note
•If is pressed, the display will return to the main menu.
•If is pressed during the brewing process, it immediately
stops the process.
After
flashes, the display will return to the main menu.
O When brewing is completed, display will return to the main menu.
Wait until display shows the main menu to remove the cup(s).
Q To turn off the power after use « P. GB27