Asus INTEL TUSL2 - Manual (Page 69)

ASUS TUSL2 User’s Manual 69
4. BIOS SETUP
4. BIOS SETUP PCI Configuration
IRQ XX Reserved [No]
These fields indicate whether or not the displayed IRQ for each field is
being used by a specified device. The default value indicates that the dis-
played IRQ is not used. Configuration options: [No] [Yes]
PCI/PNP IRQ Resource Exclusion
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
Primary VGA BIOS Sequence [PCI Card]
If the computer has both PCI and AGP VGA controllers, this field allows
you to select which of the controllers will act as your primary graphics
controller. The default, [PCI Card], gives precedence to the PCI controller
when detected. [AGP Card] uses the AGP controller as your primary
controller. [Onboard] is for custom set ups. Configuration options: [PCI
Card] [AGP Card] [Onboard]
Intel CNR LAN Boot ROM [Disabled]
If the PC enables an Intel LAN card via the CNR slot, select [Enable].
Configuration options: [Enabled] [Disabled]
Onboard Audio Controller [Enabled]
This field controls the onboard C-Media audio controller chipset.
Configuration options: [Enabled] [Disabled]