Asus INTEL TUSL2 - Manual (Page 19)

ASUS TUSL2 User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
2) ATA100 / RAID 0/1 (JP3)
These jumpers enable either the ATA100 IDE Controller, or the IDE RAID
controller function. The default setting is ATA100.
Setting
JP3
Enable ATA100 [2-3] (default)
Enable RAID 0/1 [1-2]
3) Onboard IDE ( JP4)
These jumpers enable or disable the IDE function of the motherboard. Under
normal circumstances, these jumpers must be set to the default.
Setting
JP4
Enable Onboard IDE [1-2] (default)
Disable Onboard IDE [3-4]
TUSL2
®
COM1
TUSL2 ATA100/RAIDO Selection
RAID0/1 ATA100
3 2 2 1
JP3
(Default)
TUSL2
®
COM1
TUSL2 Onboard IDE Selection
ENABLE
Onboard IDE
3 2 2 1
JP4
DISABLE
Onboard IDE
(Default)