Asus INTEL TUSL2 - Manual (Page 40)

40 ASUS TUSL2 User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
18) Chassis Intrusion Lead (2-pin ACHA)
This lead is for a chassis designed for chassis intrusion detection. After-market
toggle switches may also be installed to the chassis panel or on any removable
components. Two wires should be available from the chassis to connect to this
lead. When any chassis component is removed, the contact should open and the
motherboard will record a chassis intrusion event. (The event can then be
processed by software such as LDCM.) If the chassis intrusion lead is not used,
a jumper cap must be placed over the pins to close the circuit.
17) ASUS iPanel Audio Connector (12-1 pin AAPANEL)
Connect the audio cable from the optional ASUS iPanel to this for front panel
audio control.
TUSL2
®
COM1
TUSL2 Audio Panel Connectors
MICPWR
Line in_R Line in_L
MIC2
Line out_L
AGND
AGND2
AGND3 Line out_R
AAPANEL
TUSL2
®
COM1
TUSL2 Chassis Open Alarm Lead
ACHA