Apple Macintosh LC 550 - Manual (Page 32)

You’ll need to hook your fingers around the little metal boxes to pull the logic board.
9.
R
emove the processor
-dir
ect expansion car
d from its
static-proof bag. Hold the card by its top edge to avoid touching the connector on the bottom of the card.
10.
Align the car
d over the expansion slot.
11.
Pr
ess down on the car
d until the connector is solidly in
place. Don
’t force the card. If you meet resistance, pull the card out
and tr
y again. T
o see if the card is properly connected, lif
t it
gently
. If it resists and stays in place, it’s connected.
continues
.
27